yo ekipa vrijeme je za prime95:-)!
odlucio sam otvoriti temu o primeu95 jer na bug-u prave teme o njemu nema a definitivno je zasluzuje i i moderator mi je rekao ak bude ok da ide u sticky:-)!
kao sto vecina bug-ovca zna a i oni koji neznaju:-) da je to najpopularniji program za testiranje stabilnosti i pouzdanosti cpu-a, ram memorije a i maticne ploce koja to dvoje povezuje, jer ako i postoji i najmanja greska izmedu toga troje prime95 ce se srusiti i izbaciti neki error!
doticni program je izbacen davne 1995/1996 godine, necu ulaziti u pojedinosti no ak nekog zanima tu je wikipedija linkhttp://en.wikipedia.org/wiki/Prime95#Release_history
evo i linkovi za download:
http://files.extremeoverclocking.com/file.php?f=103
http://www.overclock.net/t/137251/prime95
http://www.guru3d.com/files_details/prime95_download.html
http://www.techpowerup.com/downloads/114/prime95-v24-14/
ja cu ovaj test bazirati na nekim osnovnim informacijama pa ko zeli nek se nadoveze ili mi posalje na pp kaj jos da dodam! odma cim pokrenete prime95 otvorit ce vam se glavni prozor s 4 testa pa krenimo:
postoje tri glavna testa i custom test koji se najmanje koristi pa njega necu opisivati posebno! predpostavljam vecina vise/manje zna engleski pa nece biti problema koji je za sta, bez obzira koji god da pokrenete ak postoji error ili bilo kakve nestabilnosti prime ce izbaciti error ili ce se srusiti, nedaj boze tad imate gadan problem:-)...ja cu dolje copirati znacenje svakog testa, nisam htio prevoditi da nebi nekaj krivo napisao!( ak neko zeli nek mi posalje na pp pa stavim na hrvatskom):-)
1. Small FFts (maximum FPU stress,data fits in L2 cache,RAM not tested much)
The "Small FFTs" test uses relatively small FFTs which can fit into the CPU cache. As a result, the small FFT test is the one which accesses your main memory the least but it still makes some memory accesses. Prime95 automatically creates a FFT size range which will fit into the L2 cache of your CPU.2. In-place large FFTs (maximum heat,power consuption,some RAM tested)
The "In-place large FFTs" test uses relatively large FFTs which cannot fit into the CPU cache so this test accesses main memory a lot. It only accesses a relatively small amount of main memory because it runs the FFTs in-place so it accesses the same RAM over and over.3.Blend (tests some of everything,lots of RAM tested)
The "Blend" test uses FFTs with sizes which range from very small to very large. The FFTs are not run in-place so the tests cycle through RAM. The blend test automatically picks a "Memory to use" value which uses up all the RAM in the computer. This is the version of the test which is most likely to fail if you have bad RAM. Note that on some computers running some versions of Prime95, the blend test allocates more memory than can fit into the physical RAM in the computer. When that happens, Windows has to use virtual memory and the test ends up accessing the hard disk a lot. That ruins the test because the CPU isn't doing anything while it is waiting for the hard disk to access the data whereas the test is really supposed to be keeping the CPU busy at all times in order to stress it. You can tell that the test isn't working properly if the hard disk activity light is on most of the time. When the blend test is running properly, the hard disk is only accessed occasionally. If you're running Windows 2000 or Windows XP then you can also check whether the CPU is fully utilized in the task manager. If the blend test has allocated too much memory then stop the test and bring up the "Run a Torture Test" window and make sure "Blend" is selected. Then select "Custom", reduce the value in "Memory to use (in MB)" to a somewhat smaller value, and then run the test again. Continue until you find a small enough value which works properly.
4.Custom (kao sto sam rekao necu ga opisivati jer ovdje upisujete sami sta zelite a ionako imate gore 3 testa vec definirana pa za ovim ima najmnje potrebe)
ovako dolje izgleda sam test..
nakon bilo kojeg testa cpu ce vam se zakucati na 100% usagea sto naravno grije doticni do nestabilnih granica(ak je u pitanju lose hladenje) pa je prilikom testa potrebno imati/osigurati dovoljno hladenje iako vam danas niti jedna igra nece dici cpu usage do te mjere kao prime95 no on vam moze biti odlican pokazatelj koliko vam se procesor dobro hladi s trenutnim hladenjem ak vam se pregrijava u primeu95 trebali bi razmisliti o boljem hladenju doticnog kao sto sam na pocetku teksta rekao najvise ga koriste entuzijasti/klokeri za provijeru stabilnosti cpu-a prilikom overklokanja cpu-a! neki kazu da ga treba vrtiti barem 1 sat, neki 5, neki 24 sata ja necu ulaziti u to osobno sam najvise vrtio pola sata i to mi se pokazalo kao cist ok podatak stabilnosti( doduse nisam nikad vrtio prime na nekim vroglavim gigahercima primjer i7 920 s stocka 2.6 na 4.45ghz sto daje overklok od 1.8ghz pri 1.6V jer mi je rikavao pri samom pokretanju primea95 stvarno cudno:-)))
eto toliko za sad sto sam stigao, pitajte sve sto vas zanima, svoje rezultate, probleme itd sretno przenje!
LP!